 |
Two-component silicone insulating glass sealant refers to the silicone rubber is divided into A and B two groups, any group alone can not form curing, but the two groups of glue once mixed to produce curing. It mainly plays the sealing role of insulating glass.
Specification:
A group: 190L
B group: 19L
Color: dark grey
Shelf life: 12 months
Product description:
· Meet the standard requirements of silicone insulating glass sealant.
· It has good adhesion to most substrates, including coated glass, colored glazed glass, anodized aluminum and stainless steel.
· No pollution, no corrosion to the adhesive substrate.
Product advantage:
Great air tightness
Excellent aging resistance
Anti-high and low temperature
Direction for use:
(Customers should conduct corresponding tests before use and determine whether the performance meets the application requirements.)
· During construction, A:B=10:1(volume ratio) is fully mixed to achieve uniform color difference.
· It is not recommended to use for seal interfaces whose displacement exceeds 15%.
· Don’t advising to use for the place which progressive flooding condition
· Do not use on surfaces where plasticizers or solvents will ooze out.
Two-component silicone insulating glass sealant refers to the silicone rubber is divided into A and B two groups, any group alone can not form curing, but the two groups of glue once mixed to produce curing. It mainly plays the sealing role of insulating glass.
Specification:
A group: 190L
B group: 19L
Color: dark grey
Shelf life: 12 months
Product description:
· Meet the standard requirements of silicone insulating glass sealant.
· It has good adhesion to most substrates, including coated glass, colored glazed glass, anodized aluminum and stainless steel.
· No pollution, no corrosion to the adhesive substrate.
Product advantage:
Great air tightness
Excellent aging resistance
Anti-high and low temperature
Direction for use:
(Customers should conduct corresponding tests before use and determine whether the performance meets the application requirements.)
· During construction, A:B=10:1(volume ratio) is fully mixed to achieve uniform color difference.
· It is not recommended to use for seal interfaces whose displacement exceeds 15%.
· Don’t advising to use for the place which progressive flooding condition
· Do not use on surfaces where plasticizers or solvents will ooze out.
注: 建议图片大小150px*50px 
